Tappet Sentence Examples | Use Tappet in a sentence

1.the factory is Tappet car engine and hydraulic piston pin the specialized production enterprises.

2.industry: connecting rod assembly; crankshaft, camshaft; valves and components; valve Tappet, push, spring; piston, piston ring, piston pin;

3.based on the calculation, after using the hydraulic Tappet, the valve train not only has less vibration and noises but the cam contact stress has been improved obviously.

4.pull each of the components out of the flat-base Tappet housing using a strong magnet.

5.industry: crankshaft, camshaft; valve Tappet, push, spring; flywheel ring gear; tensioner pulley; transmission shaft; synchronizer;

6.phosphating is usually applied to the cam and Tappet of engine for the inhibition of early scratch.

7.the influence of quenching temperature and holding time on graphite content, hardness and wear resistance of the chilled end of a valve Tappet made of an alloy cast iron has been investigated.

8.the paper introduces two methods to calculate the contact stress between cam and Tappet, regarding the valve gear as rigidity or elasticity.

9.industry: body and accessories; seats and accessories; valve Tappet, push, spring; spring; pneumatic components; marine hardware;

10.the valve Tappet guide must be replaced if it displays irregularities deviating from the limit sample photo.

11.if you see any sign of wear, replace the affected hydraulic Tappet.

12.this guarantees a better test and the unequivocal centring of the Tappet push rod of the slave cylinder in the release lever!

13.Tappet clearance will cause the exhaust valve to open late and close early in cycle and will reduce its maximum lift.

14.the reason of the formation of gas porosities and cracks on the head face of valve Tappet has been studied.

15.make sure that theflat-based Tappet guides are not damaged.

16.in order to deeply comprehend the wear regularity of chilled alloy cast iron Tappet, the influence of surface layer microstructure on wear resistance was studied.

17.valve Tappet adjustment for three and five& cylinder engines

18.inner lift arm and Tappet assembly

19.the new technology and new structure of model ajr engine applied in santana 2000 car is introduced, including light valve gear, camshaft, Tappet friction pair, timing transmission system, lubricating system and cooling system.

20.lift the ram and position the Tappet ( with the ball bearing) inside the tester cup.

21.the utility model aims at providing a combined hard alloy Tappet which has a high fatigue resistance and a large allowable contact stress.

22.computation method of elastohydrodynamic lubricant film thickness between cam and Tappet of ic engines

23.industry: automotive filters; and connecting rod bearing; valve Tappet, push, spring; flywheel ring gear; gasket components, oil seals;

24.before design cam, the Tappet displacement curve has to be design.

25.of course, the fundamental solution to the problem or to improve the Tappet of the material and size accuracy.

26.experimental investigation in the influence of Tappet rotation on anti-scuffing property of cam-Tappet

27.Tappet oil gallery rising-stem double-disk parallel slide valve

28.in other words, the pedal must lie on the Tappet push rod.

29.the construction of a new type anti-pitting Tappet with a cast hole in its end face and isothermally treated are described.

30.hydraulic valve Tappet removal/ installation tool

31.the lubricating film simulation of the cam-Tappet pair with the consideration of dynamic effect.

32.settling test is a key working procedure to ensure the functions of a hydraulic Tappet.

33.slide hydraulic Tappet remover/ installer tool c-4129-a through opening in cylinder head and seat tool firmly in the head of Tappet.

34.in order to satisfy the requirement of high precision and mass production, an automatic production line of Tappet hole has been designed.

35.the key problem of structural design of ceramic-metal composite Tappet rod is the connecting man-ner.

36.in this article the valve Tappet adjustment for three and five-cylinder of four-cycle engines is discussed.

37.on the base of the known stiffness valve and damping value of hydraulic Tappet, the dynamic state responds of hydraulic Tappet valve train are calculated by means of force analysis of the model.

38.the utility model discloses a combined hard alloy Tappet which includes a Tappet body whose one end surface is provided with a concave platform inside which is connected with a hard alloy slice.

39.experimental investigation on engine cam-Tappet rotation and its influential factors