Insulation Sentence Examples | Use Insulation in a sentence

1.the performance of heat Insulation materials currently used for heat Insulation ring is analyzed and compared.

2.for general Insulation and protection for appliance, wire harness, transformer, lead wire of motors, etc.

3.the hot intensity of the heat Insulation parts is analysed by the finite element method.

4.it discussed the echo and radiation heat-shielding performance of self-made echo heat Insulation coating.

5.the function of ground paper fiber and ground paper fiber adhesive is for sound absorption and thermal Insulation purpose.

6.jobs for contractors to install energy-saving windows and Insulation.

7.this building system possesses the characteristic of good heat preservation and thermal Insulation.

8.for monitoring temperature, Insulation and mechanism of medium voltage switchgear, an on-line monitoring system was developed.

9.resin for thin wall wire Insulation, small parts, film and tubing.

10.rock wool Insulation board has good fire prevention, Insulation and sound absorption performance.

11.this report covers preliminary results of epr study of electrical aging in epoxy resin for Insulation.

12.efficient thermal Insulation block is a new type of building materials with the function of load-bearing and thermal Insulation.

13.please examine the Insulation of the electric wires in my house.

14.in the cold regions, both heat preservation and thermal Insulation compound walls can be assembled.

15.the structure and properties of materials provides the best waterproof control, good thermal Insulation and fireproof performance.

16.a wet suit provides excellent Insulation.

17.as the wind of the new system and the system temperature, will not be replaced with new ones wind weakening housing Insulation properties.

18.can be used as polystyrene board Insulation systems and extruded plate Insulation system of leveling material.

19.also can use as Insulation resistance meter.

20.some Insulation detection methods, which used in power system for dc power system is introduced.

21.this paper presents a new method for breakdown location on power cable Insulation.

22.polystyrene board Insulation on the external walls of the material systems are often difficult to meet this requirement.

23.if the Insulation is to be as well protected after it is reduced, the arrester rating must be correspondingly reduced.

24.supplier shall be responsible for painting, Insulation and package for relevant equipment, pipes system and materials.

25.the installation, functions and technical requirements of heat Insulation ring on directly buried steam pipeline are introduced.

26.an isolation resistance or Insulation resistance test is often performed in addition to the continuity test.

27.that means the next generation of power lines could carry up to a quarter more current without adding any more bulky Insulation.

28.reducing the surface emissivity of a clothing ensemble is not in fact a very effective way of increasing its thermal Insulation.

29.it was as if he had a coating of Insulation about all his feelings.

30.a lightweight thermoplastic; used especially in packaging and Insulation.

31.a new resin for corrosion protective and fire resistant and heat Insulation dual functional coatings has been developed.

32.easy to crystallize and can be widely used in viscous fluids, and Insulation to meet the needs of media applications.

33.the blown-in Insulation and broken glass filled our hair and eyes.

34.this paper presents the formation of the magnetically Insulation and the basic principles of computer simulation.

35.users are advised to after dinner and before going to bed at night on the water, with water and good Insulation effect.

36.high electricity bills point to a poor heating system or bad Insulation

37.kaefer provides of specialist products and systems for Insulation, acoustics and fire protection.

38.note: the external Insulation diameter of the monitoring cores should correspond to that of the dynamic core.

39.as such, the Insulation was designed to accomplish this through combined ablative cooling and thermal resistance.

40.one end of the protective casing is provided with a flaring for the butt-joint of the heat-Insulation case.