Combustion Sentence Examples | Use Combustion in a sentence

1.one gram of carbon Combustion can produce exactly how much carbon dioxide'?

2.it may be flat, concave, and convex or any one of a great variety of shapes to promote turbulence or help control Combustion.

3.the Combustion speed of the biogas engine increased because of the hydrogen contained in the biogas.

4.this machine's Combustion chamber is bad.

5.it was the brilliant french chemist , antoine laurent lauvoisier , who eventually discovered the true nature of Combustion .

6.even oxy-fuel Combustion, which has been used for more than a decade, is restricted by these heat transfer dynamics.

7.the fluorine emission characteristics and industrial experiment results of fluorine retention during coal Combustion in fluidized bed were reported.

8.investigation of Combustion process and development of Combustion system of lean-burn nature gas engine

9.effects of egr and cooled egr on Combustion and emission of a diesel engine

10.the diesel engine Combustion is a physical and chemic process which is complex and changeable.

11.researches on Combustion characteristic of raw gas have been done at different excess air coefficients in the article.

12.at last, this paper analyzes the way of Combustion control of decreasing nox of combined cycle unit.

13.the Combustion process of this diesel engine during main injection and post injection are analyzed in the paper.

14.the predeterminate target is achieved satisfactorily on swirl Combustion system.

15.energy can be recovered and returned as process make-up air, used to preheat Combustion air, or used for plant or office heating.

16.an experimental system is established to recognize and to predict the different Combustion states.

17.a lot of the heat from this Combustion goes right out the exhaust system, but some of it soaks into the engine, heating it up.

18.the internal Combustion engine won out.

19.the results: more carbon deposits in the Combustion chamber and on the fuel injectors.

20.the energy is released by Combustion on the application of a match

21.Combustion at high temperature causes decomposition to nitrogen and water.

22.Combustion test indicated that the product had properties of flame retardant and could be easy to extinguish without smoke or melting drops.

23.the two principal Combustion products are water vapor and carbon dioxide.

24.the effects of internal phase construction on the stability and Combustion characteristics of emulsified diesel oil were discussed in this paper.

25.burners, pilots, ignitors, and Combustion control instrumentation.

26.by means of cr injection it is possible to control Combustion precisely and flexibly within the operating range of the engine.

27.a detailed analysis has been made about the Combustion property of coke in a cupola in this paper.

28.the ratio of fluoranthene to pyrene may indicate that pah area was mainly from uncompleted Combustion.

29.the objective of post injection is to further optimise the Combustion process and thus achieve even lower exhaust emissions.

30.in normal temperature, applying microemulsion diesel fuel to diesel engine and its mechanism of Combustion are analyzed and studied.

31.adjustment of the Combustion flame, the outer edge of the bottom of the pot so that it would not exceed, the best heating effect.

32.there are various types of engines such as electric motors, steam engines and internal Combustion engines.

33.in the internal Combustion engine outboard engines, with a compact, small size, light weight and easy to start and many other advantages.

34.with your Combustion chamber filled by cooler, oxygen-rich air, fuel burns at a more efficient mixture.

35.based on this model, the effects of Combustion chamber configuration upon Combustion performance and engine performance were studied.

36.the relationship of Combustion efficiency and pulverization coal size distribution by using the different kinds coal is studied.

37.in-cylinder thermodynamic state dominates the ignition and Combustion process of the hcci gasoline engine.

38.the ignition and Combustion characteristics of pasty propellant are important parameters for the motor design.

39.chamber compatibility and injector durability involve the control of the Combustion environment.